WinnerOne Comfort Exterior Emulsion can be applied on vast range of exterior surfaces viz cement plaster, masonry.

Surface Preparation

• Ensure that the substrate to be painted is free of any dirt, dust, oil, grease, any algea / fungal growth or any other type of contamination.
• This can be achieved by vigorous brushing of surface with media like wire, tar brush etc and cleaning with soft water.
• In case of pre painted surfaces – loose old paint etc should be thoroughly removed.
• Surfaces showing signs of chalking and flaking should be treated with some suitable sealer etc.
• Touch Ups/Rectification
• Any touch up/ rectification required in the surface should be done with sand cement mortar only and it should be subjected to proper curing.
• For freshly plastered surface, care should be taken for proper curing and sufficient drying time.

• Covering** On normal masonry surface brush applied 60-70 sq ft per ltr
• Recommended Dry Film
• Thickness(DFT) 60 – 70 microns for 2 coats
• Weight Per Ltr 1.25+/-0.05
• PH 8 to 9
• Thinning 30-35% by volume with water
• Drying Time Touch Dry 1hr | Recoat : 4-6 hrs
• Shelf Life Minimum 1yr when stored in original sealed container away from sunlight and excessive heat.
• Pot Life 24 hrs

** Actual coverage may vary on factors such as substrate porosity, method of application etc.

Before Use

• Do not overdilute or over extend the brush
• Stir Well Before Use
• Post Application
• For performance optimisation – ensure proper washing and cleaning of structures at regular intervals.
• Pack Sizes & Shade Range
• Pack Size Availability: 1ltr, 4ltr, 10ltr, 20ltr
• Available in Large Shade Range