HomeCoat’s WinnerOne Comfort water primer is an Acrylic Base primer recommended as a base coat for internal & external paintings. It is water thinnable & formulated to seal the base surface, so as to accept the topcoat easily & to protect the substrate & give an elegant look to the walls.
- HomeCoat’s WinnerOne Comfort Primer is very easy for application.
- Being Acrylic base it is compatible to the acrylic emulsion applied over it.
- Being water base it saves the extra cost of thinner for dilution.
- It’s a universal primer for all water based paints. It can be used before application of distemper, interior and exterior emulsion and even for luxury paints.
WinnerOne Comfort Water Primer is compatible to the following substrates – P O P, Gypsum, Gypsum board false ceilings, Asbestos sheets, Concrete, Plaster etc.
Surface Preparation
- Scrach the surface properly before applying the primer
- Ensure that the substrate to be painted is free of any dirt, dust, oil, grease, any algal/fungal growth or any other type of contamination.
- In case of pre-paitned surfaces – loose old paint etc. should be thoroughly removed
- Covering** 100 – 150 sft per ltr for per coat
- Colour / Finish White / Smooth
- Recommended DFT per coat 15 – 20 microns per coat depending on the condition of surface
- PH Value 8 to 9
- Hardness 4H
- Shelf Life 24 months when stored in cool & dry place in original sealed container
- Top Coat Compatible to all the existing top coating systems (viz. Distemper, Plastic, Luster, etc)
** Covering mentioned is for application above acrylic putty, the actual coverage may vary depending on the condition of surface & method of application
- Do not over thin or overextend the brush
- Stir well and strain before use
- Pack Sizes and Shade Range
- Pack Size Availability: 1ltr, 4ltr, 10ltr, 20ltr
- Shade – White